• BRA03 – Connection systems of the railways

    The purpose of this machine  

    Variety of connection systems of the railways either pneumatically or electrically or manually operated. Ability to do any required movements (right-left-up-down). They are located to any point at the railway where it is needed to connect the railways.


    Description – Connection systems of the railways

    They used before the cooling rooms and the chilling rooms before the dispatch ramp or the meat process. They are hanged at the metallic construction of the railway, and they are of excellent quality and endurance.  


    You can find here more products of: Railways and hooks 

  • DAT01 – Railway direction switch

    RAILWAY DIRECTION SWITCH

    Curve 90° constituted from benches made of cast aluminum and special treated aluminum rail. High resistance to vertical loads as well as in adverse conditions of moisture that slaughterhouses have

  • KA0085 – Aerial line of double profile aluminium railway

    The purpose of this machine

    The Aerial line of double profile aluminium railway with its handling system is ideal for handling the carcasses in slaughterhouses, meat processing industries and refrigeration chambers.


    Description – Aerial line of double profile aluminium railway

    Veral type, specially processed and suitable anodized for long lasting use to slaughter houses and meat industries. Completely made of anti-corrosion, high quality and resistant aluminium alloy.  The rail system provides: 

    • Absolute safety in carcasses movement. The hooks cannot fall from the rail.
    • Very high speed handling of carcasses, and minimize of manual strength.
    • Capability of combining rails of different directions and branches, easy handling of the flow of carcasses.
    • Long life, under difficult working conditions, with the minimum damages due to the lack of frictions (without any requirement for the use of lubricants).
    • Easy and excellent cleaning even to the most difficult points. Thus, do not occur outbreaks of microbial infections.
    • Easy and flexible installation (modular construction) with the possibility of any conversion

    You can find here more products of: Free flow railways

  • KA0091 – Aluminium curve 90°

    The purpose of this machine

    Aluminium curve 90° is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should turn 90°.  


    Description – Aluminium curve 90°

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways

  • KA0092 – Aluminium curve 45° on right

    The purpose of this machine

    Aluminium curve 45° on right is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should turn right 45°.


    Description – Aluminium curve 45° on right

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways 

  • KA0093 – Aluminium curve 45° on left

    The purpose of this machine 

    Aluminium curve 45° on left is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should turn left 45°


    Description – Aluminium curve 45° on left

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways 

  • KA0094 – Aluminium 2way branch 90° on right

    The purpose of this machine 

    Aluminium 2way branch 90° on right is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should be straight ahead or turn right 90°


    Description – Aluminium 2way branch 90° on right

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways 

  • KA0095 – Aluminium 2way branch 90° on left

    The purpose of this machine 

    Aluminium 2way branch 90° on left is appropriate for installation at the aluminium railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should be straight ahead or left 90°. 


    Description – Aluminium 2way branch 90° on left

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways 

  • KA0096 – Aluminium 2way branch 45° on right

    The purpose of this machine

    Aluminium 2way branch 45° on right is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should be straight ahead or right 45°.


     Description – Aluminium 2way branch 45° on right

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways 

  • KA0097 – Aluminium 2way branch 45° on left

    The purpose of this machine 

    Aluminium 2way branch 45° on left is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should be straight ahead of left 45°


    Description – Aluminium 2way branch 45° on left

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways 

  • KA0098 – Aluminium 3way branch

    The purpose of this machine 

    Aluminium 3way branch is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should be straight ahead or right or left. 


    Description – Aluminium 3way branch

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse. 


    You can find here more products of: Free flow railways 

  • KA0099 – Aluminium branch “Y” type

    The purpose of this machine

    Aluminium branch “Y” type is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should be right or left.


    Description – Aluminium branch “Y” type

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse.


    You can find here more products of: Free flow railways

  • KA0100-1 – Aluminium cross

    The purpose of this machine

    Aluminium cross is appropriate for installation at the aluminum railways of slaughterhouses and meat industries. It is installed at the aerial line wherever the direction should be to any direction.


    Description – Aluminium cross

    It is constituted by brackets made of cast aluminium and specially processed aluminium rail of suitable anodizing. High resistance to vertical loads as well as in adverse conditions of moisture into the slaughterhouse.


    You can find here more products of: Free flow railways

  • KST01 – Stop keys on the railways

    The purpose of this machine 

    The stop keys on the railways are used at the gravity slaughter lines in order to control the movement of the hooks on the slaughter line.


    Description – Stop keys on the railways

    They are placed at the bleeding process and to different points at the process line. They stop the movement of the carcass in front of the slaughterers in order to take place the relative procedure. It can be either pneumatically or manually operated. The construction of the STOP key is hot galvanized.  


    You can find here more products of: Railways and hooks 

  • TBR01 – Folding railway arm for dispatching ramp

    FOLDING RAILWAY ARM FOR DISPATCHING RAMP

    The folding railway arm is made of stainless steel. It is mainly placed at dispatching ramp, offering great flexibility in trucks’ loading. It can be rotated 60 degrees and extend its length 60cm.  The angles and the length of the arm can change according to any need. The folding arm can be placed wherever is necessary, even in interior area of slaughterhouse. Easy adjustment on the rail and it is prefabricated.

  • TBR02 – Folding arm at the dispatching ramp

    The purpose of this machine

    The Folding arm at the dispatching ramp is made of stainless steel. It is mainly placed at dispatching ramp, offering great flexibility in trucks’ loading.


    Description – Folding arm at the dispatching ramp

    It can be rotated 60 degrees and extend its length 60cm more. The angles and the length of the arm can change according to any request. The folding arm can be placed wherever is necessary, even at the interior area of the slaughterhouse. It is prefabricated and easy to be adjusted on the railway.


    You can find here more products of: Railways and hooks

  • TRB02 – Double profile stainless steel railway

    The purpose of this machine 

    Double profile stainless steel railway aerial line, appropriate for use to slaughter houses and meat industries.


    Description – Double profile stainless steel railway

    Completely made of anti-corrosion, high quality and resistant materials.


    The rail system provides: 

    • Absolute safety in carcasses movement. The hooks cannot fall from the rail.
    • Very high speed handling of carcasses, and minimize of manual strength.
    • Capability of combining rails of different directions and branches, easy handling of the flow of carcasses.
    • Long life, under difficult working conditions, with the minimum damages due to the lack of frictions (without any requirement for the use of lubricants).
    • Easy and excellent cleaning even to the most difficult points. Thus, do not occur outbreaks of microbial infections.

    You can fine here more products of: Railways & hooks

  • TRS01 – Aerial tubular railway

    The purpose of this machine 

    Aerial tubular railway with hot galvanized tubular, appropriate for use to slaughter houses. 


    Description – Aerial tubular railway

    The quality of the galvanization is suitable for slaughter houses and resistant to the adverse conditions into the slaughter house.  


    The rail system provides: 

    • Absolute safety in carcasses movement. The hooks cannot fall from the rail.
    • Very high speed handling of carcasses, and minimize of manual strength.
    • Long life, under difficult working conditions, with the minimum damages due to the lack of frictions (without any requirement for the use of lubricants).
    • Easy installation (assembled construction) and any amendment can be done very quickly.

    You can fine here more products of: Railways & hooks