-
FRS01 – Shafts of the slaughter area
The purpose of this machine
Drainage Shafts of the slaughter area are appropriate designed and constructed for use in sewages of slaughter houses and food processing industries.
Description – Shafts of the slaughter area
Stainless steel frame, with drainage tube Ø88.9, siphon and special blades to fit better in the concrete. It has special stainless steel fat collector for the collection of solid materials. Stainless steel cover of high resistance. Dimensions: 295X295X240mm.
You can find more products here of: By-Products process equipment
-
FRS02 – Shafts of the cooling rooms
The purpose of this machine
Drainage Shafts of the cooling rooms are appropriate designed and constructed for use in sewages of cooling rooms and food processing industries.
Description – Shafts of the cooling rooms
Stainless steel frame, with drainage tube Ø76, 1 siphon and special blades to fit better in the concrete. It has special stainless steel fat collector for the collection of solid materials. Stainless steel cover of high resistance. Dimensions: 200X200X145mm.
You can find more products here of: By-Products process equipment
-
HTD01 – Electric conveyor belt for skin
The purpose of this machine
Electric conveyor belt for skin is appropriate designed and constructed for use in slaughterhouses. It ensures the automatic removal of the skins from the slaughter area without labour cost or use of trolleys.
Description – Electric conveyor belt for skin
Strong construction, excellent quality and high resistance. The non-sliding conveyor belt has dividers in order to separate the skins of each carcass. It has an automatic cleaning system which operated during the operation of the belt. Simple use and complied with all safety standards in accordance with the directive 98/37 EC of the European Union. Completely made of stainless steel, electric operation with electric motor and control switchboard with low voltage.
You can find here more products of: By-Products process equipment
-
MKP01 – Machine for stomach emptying
The Purpose of this machine
The purpose of this procedure is to reduce the volume of the materials that will be send to the rendering plant in order to achieve keep the operational cost of the plant in the lower levels possible. The quality of the procedure depends on the manufacturing details such as the cutting discs, its position, rotation speed, duration and finally the inside area formation.
Stomach emptying Machine Operation description
In order to achieve the best results the machine cut (mainly lengthways) the intestines
and the stomachs with result to empty that is drives to the drainage of the machine. When the machine cuts the intestine and stomachs, it washes the intestines and the stomachs while it sprays water for o short time. The machine’s operation is based on centrifugal force that drives the material to walls while the special perforated plate is rotated. At machine’s walls there are four blades which rotate in reverse and thus cut the intestines and stomachs. The material that is ejected from the stomach is drives to the drainage through the holes that are in the perforated plate. The machine in the end of each cycle makes self-cleaning to keep the internal place clear. A full work cycle lasts approximately 8min and can process 150kg of material.
Stomach emptying Machine Features
This machine is manufactured complete in high quality stainless steel.
- Elimination of stomacs and intestines contents
- Reduce volume until 55%
- Capacity 900kg/h max (weight of material in its first condition)
- Stomach & Intestine wash
- Automatic cleaning
- CE Certification
- No maintenance cost
- Silent operation
- Simple & Easy handling
Technical Data of Stomach Emptying Machine
Number of Gear Motors 2pcs Total Power 8.05kw Operation Voltage 380V Controller Voltage 24V Cable Type 3X1,5mm2 Air Inlet 1/2'' Pneumatic Piston Φ100Χ150 Operation Pressure 5bar Air Consumption 11lt/cycle Diesel Inlet 1/2'' Diesel Consumption 500lt/h Thermal Power 15kw Working Temperature Steam Inlet 1/2'' Steam Pressure 6bar Steam Consumption 200kg/h Working temperature 133 C Water Inlet 1/2'' Water Pressure 5bar Water Consumption 100lt/h Tank size 2.000lt Tank capacity 1.000lt Full cycle duration 30min Burning chamber dim. 300X200X500 Performance - Capacity 900kg/h Linear Speed 14m/min Dimensions 300X200X500 Weigh 660kg -
PKE01 – Working table for cleaning and inspect the offal
The purpose of this machine
The working table for cleaning and inspect the offal is used at the offal process room.
Description - Working table for cleaning and inspect the offal
It is made of stainless steel. It contains a special rack, in order to facilitate the rejection of the waste materials.
You can find here more products of: By-Products process equipment
-
PNO01 – Pneumatic inducer of offal
The purpose of this machineThe Pneumatic inducer of offal is special designed to convey the offal of the animals, pneumatically via plastic pipes from the slaughter area to the by-products process area.
Description – Pneumatic inducer of offal
It minimizes significantly the labour cost which was needed in order to transfer the offal at the by-products area. Also there is no use of trolley which can cause difficulties at the movement of the slaughterers in the production line. Usually, it is feeded by the conveying belt of offal. The pneumatic inducer has the ability to transfer great amounts of offal to long distances. Simple and easy operation by a controller which is placed on the machine.
- Eliminate the use of trolleys for offals
- Easier – Quicker offal conveyance
- CE Certification
- No maintenance cost
- Silent operation
- Simple & easy handling
Number of Gear Motors 2pcs Total Power 8.05kw Operation Voltage 380V Controller Voltage 24V Cable Type 3X1,5mm2 Air Inlet 1/2'' Pneumatic Piston Φ100Χ150 Operation Pressure 5bar Air Consumption 11lt/cycle Diesel Inlet 1/2'' Diesel Consumption 500lt/h Thermal Power 15kw Working Temperature Steam Inlet 1/2'' Steam Pressure 6bar Steam Consumption 200kg/h Working temperature 133 C Water Inlet 1/2'' Water Pressure 5bar Water Consumption 100lt/h Tank size 2.000lt Tank capacity 1.000lt Full cycle duration 30min Burning chamber dim. 300X200X500 Performance - Capacity 900kg/h Linear Speed 14m/min Dimensions 300X200X500 Weigh 660kg
You can find more product here of: By-Products process equipment
-
PNO02 – Pneumatic inducer of manure for stomachs
The purpose of this machineThe Pneumatic inducer of manure for stomachs is special designed to convey the manure from the offal process area out of the building pneumatically via plastic pipes.
Description – Pneumatic inducer of manure for stomachs
The pneumatic inducer has the ability to transfer great amounts of manure to long distances. Simple and easy operation by a controller which is placed on the machine.
- Eliminate the use of trolleys for offals
- Easier – Quicker offal conveyance
- CE Certification
- No maintenance cost
- Silent operation
- Simple & easy handling
You can find more product here of: By-Products process equipment
and the stomachs with result to empty that is drives to the drainage of the machine. When the machine cuts the intestine and stomachs, it washes the intestines and the 
The purpose of this machineCopyright © 2017 Hatziioakimidis.gr